2091.45. 供滚珠保持架使用的带法兰导套, ISO 9448-5
Volltreffer
材料:
工具钢，硬化处理 62 ± 2 HRC结构:
工作面经过珩。
安装直径已精密磨削。说明:
导套由3颗螺丝固定，直径16：用螺丝根据 DIN 6912，直径19：用螺丝根据 DIN EN ISO 4762。
螺丝需单独订购。
工具钢，硬化处理 62 ± 2 HRC结构:
工作面经过珩。
安装直径已精密磨削。说明:
导套由3颗螺丝固定，直径16：用螺丝根据 DIN 6912，直径19：用螺丝根据 DIN EN ISO 4762。
螺丝需单独订购。
登录以查看价格、库存并订购产品。
产品
显示中 1-10 的 42 项
| SKU | 导向直径 | |
|---|---|---|
| 2091.45.015.10 | 15 mm | |
| 2091.45.015.20 | 15 mm | |
| 2091.45.015.30 | 15 mm | |
| 2091.45.016.10 | 16 mm | |
| 2091.45.016.20 | 16 mm | |
| 2091.45.016.30 | 16 mm | |
| 2091.45.019.10 | 19 mm | |
| 2091.45.019.20 | 19 mm | |
| 2091.45.019.30 | 19 mm | |
| 2091.45.020.10 | 20 mm | |
| 2091.45.020.20 | 20 mm | |
| 2091.45.020.30 | 20 mm | |
| 2091.45.024.10 | 24 mm | |
| 2091.45.024.20 | 24 mm | |
| 2091.45.024.30 | 24 mm | |
| 2091.45.025.10 | 25 mm | |
| 2091.45.025.20 | 25 mm | |
| 2091.45.025.30 | 25 mm | |
| 2091.45.030.10 | 30 mm | |
| 2091.45.030.20 | 30 mm | |
| 2091.45.030.30 | 30 mm | |
| 2091.45.032.10 | 32 mm | |
| 2091.45.032.20 | 32 mm | |
| 2091.45.032.30 | 32 mm | |
| 2091.45.038.10 | 38 mm | |
| 2091.45.038.20 | 38 mm | |
| 2091.45.038.30 | 38 mm | |
| 2091.45.040.10 | 40 mm | |
| 2091.45.040.20 | 40 mm | |
| 2091.45.040.30 | 40 mm | |
| 2091.45.048.10 | 48 mm | |
| 2091.45.048.20 | 48 mm | |
| 2091.45.048.30 | 48 mm | |
| 2091.45.050.10 | 50 mm | |
| 2091.45.050.20 | 50 mm | |
| 2091.45.050.30 | 50 mm | |
| 2091.45.060.10 | 60 mm | |
| 2091.45.060.20 | 60 mm | |
| 2091.45.060.30 | 60 mm | |
| 2091.45.063.10 | 63 mm | |
| 2091.45.063.20 | 63 mm | |
| 2091.45.063.30 | 63 mm |
