252.7. Setting-up bumper, square
Description:
Setting up bumpers are used for setting down and setting up tools and replace shear pins. Material:
FIBROFLEX®
Hardness 95 Shore A Attention:
Setting up bumpers are not suitable for continuous use. To prevent damage when setting down tools, ensure that the setting up bumpers are large enough to withstand 1.5 times the weight of the tool (see table). Implementation:
1. When setting up slowly move the ram into the bottom position.
2. Clamp the tool, then move the ram back to the top position (with the setting up bumper compressed to a height of 60 mm).
3. After setting up, remove the setting up bumpers and place them in the storage hole on the tool.
Setting up bumpers are used for setting down and setting up tools and replace shear pins. Material:
FIBROFLEX®
Hardness 95 Shore A Attention:
Setting up bumpers are not suitable for continuous use. To prevent damage when setting down tools, ensure that the setting up bumpers are large enough to withstand 1.5 times the weight of the tool (see table). Implementation:
1. When setting up slowly move the ram into the bottom position.
2. Clamp the tool, then move the ram back to the top position (with the setting up bumper compressed to a height of 60 mm).
3. After setting up, remove the setting up bumpers and place them in the storage hole on the tool.
Log in to view price, availability, and order the product.
Products
Showing 1-10 of 4 items
| SKU | Length | Width | |
|---|---|---|---|
| 252.7.080.060 | 80 mm | 60 mm | |
| 252.7.100.080 | 100 mm | 80 mm | |
| 252.7.125.100 | 125 mm | 100 mm | |
| 252.7.180.100 | 180 mm | 100 mm |